EN
NL 
DE 
FR 
Code: TPP101864
Min. order quantity:
1
Order multiple:
1
Min qty: 1
MD1 FttH 4x4-8mm
The MD1-FttH multi duct has been developed for gas and watertight sealing of multiple cables or subducts.
The sealing cap is easily secured on the outside by means of an anchoring pin of the house. This eliminates the need to drill additional holes and secure the hood with screws.
After fitting the cap, the cap is filled with expanding PU resin type 2234. The packaging contains exactly the right amount to make a good seal. After injecting the resin, it expands and fills the entire passage. The resin is fully cured within 30 minutes. This will repair any damage to the outside of the wall.
We recommend using the Fill & Seal sealing compound.
Throughout diameter min.-max.: Ø 16-32mm
Diameter cables or pipes: Ø 4-8mm
Number of microducts/cables: 1 to 4
Kit content:
▪ MD1-FttH cap
▪ Anchoring pin (small)
▪ 2 component mixing pack 101gr., PU resin type 2234
▪ Screw opener
▪ Gloves
▪ Emery cloth
The MD1-FttH multi duct has been developed for gas and watertight sealing of multiple cables or subducts.
The sealing cap is easily secured on the outside by means of an anchoring pin of the house. This eliminates the need to drill additional holes and secure the hood with screws.
After fitting the cap, the cap is filled with expanding PU resin type 2234. The packaging contains exactly the right amount to make a good seal. After injecting the resin, it expands and fills the entire passage. The resin is fully cured within 30 minutes. This will repair any damage to the outside of the wall.
We recommend using the Fill & Seal sealing compound.
Throughout diameter min.-max.: Ø 16-32mm
Diameter cables or pipes: Ø 4-8mm
Number of microducts/cables: 1 to 4
Kit content:
▪ MD1-FttH cap
▪ Anchoring pin (small)
▪ 2 component mixing pack 101gr., PU resin type 2234
▪ Screw opener
▪ Gloves
▪ Emery cloth